iPECS UCP - 4.19 Outside Line Preset Forward

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
325
Table 4.4.4.4-1 ISDN ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
ISDN Line Type
The system will encode voice using the A-law or u-
law PCM format to match the installed ISDN back
bone.
μ-Law/
A-Law
μ-Law
Calling Sub-address
For outgoing calls, the user’s station number may be
included in the ISDN call SETUP message Sub-
address field.
OFF
ON
OFF
Screening indicator The ISDN Screening Indicator can be configured.
User Provided,
No Service/
User Provided,
Pass/
User Provided,
Fail/
Network
Provided.
User Provided,
No Service
ISDN PLUS Code
When the incoming CLI starts with “+”, this value will
be inserted in place of the “+” sign.
0000-9999 -
CP/Alert inband
Send progress indication with in-band information in
Call proceeding and Alerting messages.
OFF
ON
OFF
Disconnect inband
Send progress indication with in-band information in
Disconnect message.
OFF
ON
OFF
Disconnect with Inband
Info
When system receives DISCONNECT message with
Inband information from PSTN, the following option
can be applied:
-. Ignore Inband information: Line is disconnected
-. Bypass Inband information: Progress Information is
transferred
-. Wait Release: System wait to send Release
message till the other party is disconnected
Ignore Inband
information,
Bypass Inband
information,
Wait Release
Ignore Inband
information