iPECS UCP - 5.3 Automatic Speaker Select

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
331
Table 4.4.9-1 MATM ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Send Wink and Send Sub
Answer(IC) & Wait Wink
and wait sub answer(OG),
Unused Type
2W or 4W
For E&M Lines, this value should be set as
2 wire or 4wire to match the line.
2W/
4W
4W
DLY Start Timer
This is timer value for analog signaling.
0~255
6
Wink Timer
This is timer value for analog signaling.
0~255
6
SND ANS Timer
This is timer value for analog signaling.
0~255
6
OSND RLS Timer
This is timer value for analog signaling.
0~255
13
SND RING ON Timer
This is timer value for analog signaling.
4~255
20
SND RING OFF Timer
This is timer value for analog signaling.
4~255
40
SND RING RPT CNT
CO
This is timer value for analog signaling. 0~255 8
SND RING RPT CNT
RD
This is timer value for analog signaling. 01~20 2
CO Ring STOP Timer
This is timer value for analog signaling.
0~255
30