iPECS UCP - 5.15 On-Hook Dialing

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
351
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Alarm Attributes
[Send Mail] button is used for sending the mail after filling out the below menu
Alarm Receiver E-Mail
Address(To) &
Notification Receiver
E-Mail Address(To)
The system will send email to saved E-Mail Address
when system alarm is occurred or system restarts.
Max. 40
characters
LDAP Server Settings
Server Display Name
When the UCS Client requires access to an LDAP
server, the system will provide the LDAP server
information to the client. The server name is defined
in this field.
15 characters LDAP Server
Server IP
When an LDAP server is employed, the IP address of
the server must be defined.
0.0.0.0
Server Port
When an LDAP server is employed, the TCP/IP port
of the server must be defined.
0001-65535
Require Login
The UCS Client ID and Password may be required for
log in to the LDAP server.
OFF
ON
ON
Use SSL
When supported by the server, the client can employ
SSL (Secure Sockets Layer) for added security.
OFF
ON
OFF
Search Base
Server base means Search option. You can get the
search option from LDAP Server manager. For
example, if OU (Organization Unit) is OC and DC
(Directory Company) are ucapp and com, you can
give the option "OU=OC, DC=ucapp, DC=com" in this
field. You will get the desired directory.
LDAP User ID
ID and Password must be required to connect to
LDAP Server.
LDAP User Password