iPECS UCP - Page 369

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
354
Table 4.4.5.3-1 ALARM ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Alarm 1 Display
In case of UCP600/2400, {Alarm 1 Display} and {Alarm 2
Display} are added. Otherwise, {Alarm Display} is added.
When alarm port 1 is activated, the string of {Alarm 1
Display} or {Alarm Display} is displayed in assigned
stations.
When alarm port 2 is activated, the string of {Alarm 2
Display} is displayed in assigned stations.(UCP600/2400)
Alarm 2 Display
System Notification
Emergency Call Notify
This entry enables/disables the Emergency call
notification.
OFF,
Alarm & Email,
Email Noti
Only,
Alarm Only
Alarm & Email
DCOB Fault Notify
This entry enables/disables DCOB Fault notification.
Alarm & Email
SIP Registration Fault
Notify
This entry enables/disables SIP Registration Fault
notification.
Alarm & Email
Station Capacity Full
Notify
This entry enables user to get the notification as alarm
when Station Capacity is over the capacity.
Alarm & Email
CO Capacity Full
Notify
This entry enables user to get the notification as alarm
when CO Capacity is over the capacity.
Alarm & Email
SMDR Full Notify
This entry enables user to get the notification as alarm
when SMDR is over the capacity.
Alarm & Email
VM Memory Full
Notify
This entry enables user to get the notification as alarm
when the memory of Voice Mail is full.
Alarm & Email
WTIM (WTIB) Base
Fault Notify
This entry enables user to get the notification as alarm
when WTIM (WTIB) base gets the fault.
Alarm & Email
WTIM (WTIB) Chain
Fault Notify
This entry enables user to get the notification as alarm
when WTIM (WTIB) chain gets the fault.
Alarm & Email
I SMDR Full Notify
This entry enables user to get the notification as alarm
when I SMDR is over the capacity.
Alarm & Email
Cabinet Fault Notify
This entry enables user to get the notification as alarm
when the cabinet has fault only for eMG800 & UCP.
Alarm & Email
Bar Full Notify
This entry enables user to get the notification as alarm
when Bar is full.
Alarm & Email
IPCR Fault Notify
This entry enables user to get the notification as alarm
when IPCR gets the fault.
Alarm & Email
IP Watch Fault Notify
This entry enables user to get the notification as alarm
when IP Watch has fault only for eMG800 & UCP.
Alarm & Email
Bath Alarm Notify
This entry enables user to get the notification as alarm
about Bath Alarm.
Alarm & Email
Temp activation of all
license Expiry Notify
This entry enables user to get the notification as alarm
before Temp activation of all license expires.
Alarm & Email
Maintenance Expire
Notify
This entry enables user to get the notification as alarm
before Maintenance license expires.
Email Noti
Only
Excessive
Registration over
license Notify
This entry enables user to get the notification as alarm in
case of the excessive registration over License.
Alarm & Email
Geo-Slave/Survival
Mode (T-NET LCM)
Expire Notify
This entry enables user to get the notification as alarm
before Geographical slave/Survival mode (T-NET LCM)
license expires.
Alarm & Email
TAPI Disconnected
Notify
This entry enables user to get the notification as alarm
when TAPI is disconnected.
Alarm & Email