iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
22
Table 3.3.2.1-1 SYSTEM IP ADDRESS PLAN (PGM 102)
BTN DISPLAY DEFAULT REMARK
5
SYSTEM END IP ADDRESS
10.10.10.254
10.10.10.254 End of range for private IP addresses assigned by
the system to Modules/Terminals.
6
SYSTEM SUB NET MASK
255.255.255.0
255.255.0.0
7
AUTOMATIC IP ASSIGN
(1:ON/0:OFF): ON
ON The system will automatically assign IP addresses
to modules and terminals (ON) or, when OFF, IP
addresses are assigned manually in PGM 103
Device IP Address Plan.
8
SECOND SYS IP ADDRESS
0 . 0 . 0 .0
0.0.0.0 When devices are located on a different private
address on the same net, enter the MPB IP
address for the second LAN.
9
SECOND SYS SUB NET MASK
255.255.255 .0
255.255.255.0
10
FIREWALL IP ADDRESS
0 . 0 . 0 .0
0.0.0.0 When the system is installed behind a NAPT
server, the fixed IP Address provided by the NAPT
server must be assigned in this field.
Also, use this IP address for the MPB address in
11
FIRST START MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the start address of
the first range.
12
FIRST END MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the end address of
the first range.
13
SECOND START MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the start address of
the second range.
14
SECOND END MAC ADDR
000000000000
00.00.00.0
0.00.00
A range of MAC addresses can be entered to
register devices. This entry is the end address of
the second range.
15
SYSTEM IP ADDRESS PLAN
SYSTEM RESET
Returns System IP Address Plan to default values.
16
MPB DNS IP ADDR
0 . 0 . 0 .0
0.0.0.0 IP Address of Domain Name Server, which iPECS
will use to resolve URL to an IP address. The DNS
provides the resolution after receiving the name
17
MPB DHCP
(1:ON/0:OFF) : OFF
OFF Enable/Disable DHCP client function for the MPB.
To Next Page
Loading...
