iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
406
4.4.6 Station Group Data
Selecting the Station Group Data program group returns the sub-menu displayed in the left frame
as shown in the following figure.
Figure 4.4.6-1 Station Group Data
Stations can be grouped so that incoming calls will search (Station) for an idle station in the group.
The system allows assignment of three Station processes, Circular, Terminal and ACD. In
addition, there are eight (8) functional groups available: ACD (Automatic Call Distribution) based
on ACD station, Ring, Call Pick-Up, External Voice Mail (SLT connected), VSF-Voice Mail, iPECS
Feature Server Voice Mail and Network Voice Mail, and UCS Groups.
Certain types of groups can incorporate announcements, which are given to the calling party. The
system‘s VSF can store up to two hundreds (200) announcements for use with Station Groups.
Note that a station can belong to multiple groups if the groups are all of the same type. Also note
that when a station group is assigned to a group type (Circular, Terminal, ACD, VM, FS VM, VSF-
VM, Net VM, UCS and Ring), the group attributes are initialized to the default values.
To Next Page
Loading...
