iPECS UCP - Page 447

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
432
4.4.7.1 ISDN Attributes - PGM 200
Selecting ISDN Attributes will display the ISDN Attributes data entry page. Click [Save] button
after changing Value.
Figure 4.4.7.1-1 ISDN Attributes
ISDN attributes define several characteristics of the ISDN interface. ISDN call cost services
(Advice of Charge), CLI modification, voice encoding, and other characteristics of the interface
are defined, refer to the following table.
Table 4.4.7.1-1 ISDN ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
CO ATD Code
When the system is set to send the station number with
ISDN CLIP or COLP, either the station number or this ATD
code will be sent based on Common Attributes section,
EXT or ATD assignment.
Max.2 Digits
CLI Print To Serial
The ISDN Calling Line Id may be included in call records,
refer to SMDR Attributes section.
OFF/
ON
OFF
Display DID
Information
Display DID digit information on LCD and print it to serial
port.
OFF/
ON
OFF