iPECS UCP - 2.7.11 Incoming Call Routing

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
30
Table 3.3.2.5-1 FLEXIBLE NUMBERING PLAN PART A (PGM 106)
BTN DISPLAY FEATURE DEFAULT
8
SMDR ACT CODE ENTER
ENTER NEW #:550
Dial code to signify the start of an SMDR
Account Code.
550
9
FLASH CMD TO CO
ENTER NEW #:551
Dial code to generate a Flash on the
active CO Line.
551
10
SLT LAST SPD DIAL
ENTER NEW #:552
SLT Last Number Redial feature access
code.
552
11
DND
ENTER NEW #:553
Dial code to activate Do-Not-Disturb. 553
12
CALL FWD
ENTER NEW #:554
Dial code to activate Call Forward. 554
13
SPD DIAL PGM
ENTER NEW #:555
Speed Dial programming access dial
code for SLTs.
555
14
MSG WAIT ENABLE
ENTER NEW #:556
Dial code to activate a Message
Wait/Call Back.
556
15
MSG WAIT RETURN
ENTER NEW #:557
Dial code to return a Message Wait/Call
Back.
557
16
SPD DIAL ACCESS
ENTER NEW #:558
SLT Speed Dial access code. 558
17
DND/FWD CANCEL
ENTER NEW #:559
Dial code to cancel DND/FWD/MSG
Wait.
559
18
CO SYS HOLD
ENTER NEW #:560
Dial code to place a CO call on System
Hold.
560
19
SLT PGM MODE ENTER
ENTER NEW #:561
User program mode entry dial code for
SLTs.
561
20
ATTD UNAVAILABLE
ENTER NEW #:562
Dial code to place attendant in the
“unavailable” mode, attendant only.
562
21
ALARM RESET
ENTER NEW #:565
Dial code to terminate Alarm contact
signal.
565
22
GROUP CALL PICK-UP
ENTER NEW #:566
Group Call Pick-up dial code. 566
23
UNIVERSAL ANSWER
ENTER NEW #:567
Universal Night Answer dial code. 567