iPECS UCP - Page 454

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
439
Table 4.4.7.7-1 Prefix dialing Table Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Numbering Plan
Select Numbering Plan (0~6).
Unknown/ISDN/Data Numbering/Telex/National
Standard/Private /Reserved.
Unknown/
ISDN Telephony/
Data numbering/
Telex/
National standard/
Private/
Reserved
Unknown
Sending Complete
Select Sending Complete option. (On/Off)
ON/OFF
OFF
Call Charge Type
Call Charge Type (0~5).
Unknown/Local/Long
Distance/International/Mobile/reserved
Unknown/
Local/
Long distance/
International/
Mobile/
Reserved
Unknown
Call Charge Timer
Call Charge Timer can be assigned. By this timer
value Call Metering can be established.
000-999 0
Call Cost
Call Cost is calculated by CALL TIMER. (ex : timer is
1 min, cost is 000020, then after 3 minute call, total
call cost is calculated to 000060)
000000-999999 000000
Flat Rate
If Flat Rate is ON, Flat Rate is applied by CALL COST
per a call.
ON/OFF OFF