iPECS UCP - Page 496

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
481
Table 4.4.9.2-1 LCR LEADING DIGITS
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Compared Digits
Up to 12 digits that, if matched by the user dialed digits, will
access the DMT Indices of the associated Leading Digit
Table bin.
Max. 12 digits
(Include * and #)
Check Password
If enabled (ON), when the dialed digits match the LDT
digits, the system will send second dial tone to request the
user input a valid Authorization code.
OFF
ON
OFF
LDT Zone Number
If the LDT Zone Number of a station/co line is equal to this
value, this LDT table is available to the station/co line.
(Station Data->Common Attributes(111), CO Line Data-
>Common Attributes(140))
1-100 1
DMT1
This entry defines the Digit Modification Table index
(00~99) for each Time Zone for Day Zone 1. The
appropriate index will be selected for the current Day and
Time Zone. One entry (DMT index) is made for each Time
Zone, six (6) digits.
Must be 6 digits
3 DMT indices
DMT2
This entry defines the Digit Modification Table index
(00~99) for each Time Zone for Day Zone 2. The
appropriate index will be selected for the current Day and
Time Zone. One entry (DMT index) is made for each Time
Zone, six (6) digits.
Must be 6 digits
3 DMT indices
DMT3
This entry defines the Digit Modification Table index
(00~99) for each Time Zone for Day Zone 3. The
appropriate index will be selected for the current Day and
Time Zone. One entry (DMT index) is made for each Time
Zone, six (6) digits.
Must be 6 digits
3 DMT indices