iPECS UCP - Page 511

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
496
Table 4.4.9.11-1 Executive/Secretary Table
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Executive
Assign Executive.
Secretary
Assign Secretary.
CO Call to Secretary
If desired, all incoming CO calls to the Exec. The call is
routed to the Secretary’s station regardless of the
Executive’s status.
Enable/
Disable
Disable
Call Executive if Secretary is in
DND
If the Secretary is in DND, Executive calls can be routed
back to the Executive.
Enable/
Disable
Disable
Executive grade
Higher (or equal) grade Executives can override the
Executive/Secretary Forward feature (5
th
: ICM call to
SEC) to call a lower grade Executive. Highest grade: 01,
Lowest grade: 12.
01~12 12
ICM Call to Secretary
If this option is ON, all internal calls to the executive
station (except for calls from higher or same grade
executive) are routed to the Secretary’s station
regardless of the Executive’s status.
8801 Default value
Korea, India, Israel, Turkey,
Thailand : ON
Otherwise : OFF
Enable/
Disable
Disable
Secretary Auto Answer
When executive call to the secretary who is in ‘T’ mode.
The call will be answered by hands free mode if it is ON.
Enable/
Disable
Disable
Executive Group
If Group is greater than 1, it works that lower grade
executive can call to higher grade executive directly
when they are same group.
00-50 00