iPECS UCP - Page 579

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
564
Table 4.4.16.1-1 DECT Registration
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Desired Station Desired station number for the wireless DECT handset. Station Number
Phone Type
Several types of handsets may be selected.
GDC-480H/500H,
GDC-400/450H,
Standard GAP
GDC-
480H/500H
Press [Send] button after entering the number and
type.
DECT Unsubscribe
To terminate a subscription, enter the station number
for the DECT handset. Note the Station must be
connected, otherwise use Station Erase field below.
Station number
DECT User
Authentication
To subscribe successfully, the user will be required to
enter the Station Authorization Code from PGM 227.
DECT Mobility
When a DECT handset is registered to multiple
systems that are networked, calls can be routed over
the network to the DECT handset location.
Station number
Enter the registered station number, select Mobility ON
or OFF and click [write] box then Save the page.
OFF
ON
OFF
Station Erase
To terminate the registration for a DECT phone that is
not connected, enter the registered station number and
click [Save] button.
Station number