iPECS UCP - 2.37 Executive;Secretary Forward

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
106
Table 3.3.6.1-2 SYSTEM ATTRIBUTES II (PGM 161)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
24-9
VSF SMTP PORT
(00001~65535) : 00025
SMTP port of VMIU/VMIB 00001~65535 00025
24-10
ICM BUSY SVC
(1:INTR/0:OHVO): OHVO
If ICM busy, choice OHVO or
Intrusion.
0: OHVO
1: INTR
OHVO
24-11
AUTO SAVE NEW MEG
(1:ON/0:OFF) : OFF
If it’s ON, Move current (new)
message to saved message
category.
If it is OFF, leave it in new message
category.
0: OFF
1: ON
OFF
24-12
IGMP QUERY USAGE
(1:ON/0:OFF) : OFF
Regarding PGM161 (Flex 24-12 to
15) are used when there are some
problems in multicast packet
forwarding like as registering
devices or multicast MOH. With
some multicast snoop enabled
switch devices, they do not forward
multicast packets if there is no IGMP
query device in the network.
This entity enables the IGMP query
option and MPB sends IGMP query
message with periodic to avoid
multicast related problem.
0: OFF
1: ON
OFF
24-13
IGMP INTV_TMR(1sec)
(0000~3600) : 0180
This timer defines the interval time
of each IGMP query messages. With
some special switches, this timer
value should be modified.
(0~3600) sec 180
24-14
IGMP QUERY ALL HOSTS
(1:ON/0:OFF) : ON
This entity defines which destination
address is used when IGMP query is
sent to. If ON is selected, query
message is sent to ALL HOST group
by using address 224.0.0.1. And
OFF is selected, query is sent to
iPECS specific address by using
address 239.20.19.50. This should
be ON when there is a MOH
problem.
0: OFF
1: ON
ON
24-15
IGMP QUERY GENERIC
(1:ON/0:OFF) : OFF
This entity specifies a group address
being queried. If ON is selected, all
multicast group are queried. If OFF
is selected, iPECS registering
device group (239.20.19.50) is only
queried. This should be ON when
there is a MOH problem.
0: OFF
1: ON
OFF
24-16
UNUSED