iPECS UCP - Page 145

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
130
Table 3.3.6.17-1 SMDR ATTRIBUTES (PGM 177)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
24-4
SMDR ICM PRINT
(1:ON/0:OFF) : OFF
When enabled, intercom call data is
printed as part of the On-line SMDR.
0: OFF
1: ON
OFF
24-5
SMDR DISC CAUSE
(1:ON/0:OFF) : OFF
When enabled, the disconnect cause is
stored in Off-line SMDR data and printed
as parted of the On-line SMDR.
0: OFF
1: ON
OFF
24-6
LONG TIME CALL (10min)
(000-144) : 000
To monitor long time CO call, a “Long
Time Call” can be set. 0 means no
monitoring. If CO call duration exceeds
this value, a notification will be sent to
NMS server and alarm will be displayed.
000 ~ 144 000
24-7
PRT LIMIT TO NET CALL
(1:ON/0:OFF) : OFF
When CO call is transferred to Net
transit out CO, it’s automatically deleted
from SMDR.
0: OFF
1: ON
OFF
24-8
INTERNATIONAL CODE
….
It is used to distinguish international call
for SMDR.
4 digit ….
24-9
MOBILE PHONE CODE
….
It is used to distinguish mobile call for
SMDR.
4 digit ….
24-10
SMTP MAIL SERVER ID
……………………………
This field defines the user’s ID for SMTP
Mail server. If user’s ID and password is
assigned, SMTP Mail server will check
the validation of user ID and password.
Max 40
Chars
24-11
SMTP MAIL SERVER PWD
……………………………
This field defines the user‘s password for
SMTP Mail server. If user‘s ID and
password is assigned, SMTP Mail server
will check the validation of user ID and
password.
Max 20
Chars
24-12
TRANSFER CHARGE RATE
(0-2): INDIVIDUAL
1. INDIVIDUAL: When a call is
transferred to another station, the
transferred call is charged to two stations
respectively.
2. INTEGRATE XFERING: When a call
is transferred to another station, the call
is charged to the transferring station.
3. INTEGRATE XFERED: When a call is
transferred to another station, the call is
charged to the transferred station.
0:
INDIVIDUAL
1:
INTEGRATE
XFERING
2:
INTEGRATE
XFERED
INDIVIDUAL