iPECS UCP - 2.46.3 Integrated Voice Mail; 2.46.3.1 Administrator Mailbox

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
134
Table 3.3.6.20-1 SYSTEM TIMERS I (PGM 180)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
ATD RECALL TMR(min)
(00-60) : 01
Determines the amount of time the
attendant receives recall after which
the system will disconnect the call.
00~60
(minutes)
01
2
CALL PARK TMR(sec)
(000-600) : 120
Determines the amount of time before
a parked call will recall the station that
parked the call.
000~600
(seconds)
120
3
CAMP-ON RECALL TMR(sec)
(000-600) : 030
When a call transfer is camped-on,
this timer determines the amount of
time before the station receives recall.
000~600
(seconds)
030
4
EX-HOLD RECALL TMR(sec)
(000-600) : 060
Determines the amount of time before
a call placed on exclusive hold will
recall the station.
000~600
(seconds)
060
5
I-HOLD RECALL TMR(sec)
(000-600) : 030
Determines the amount of time before
a call that is recalling the station will
recall before also recalling the
attendant.
000~600
(seconds)
030
6
S-HOLD RECALL TMR(sec)
(000-600) : 030
Determines the amount of time before
a call placed on system hold will recall
the station.
000~600
(seconds)
030
7
TRANS RECALL TMR(sec)
(000-600) : 030
Determines the amount of time a
transferred call will ring at the
receiving station before recalling the
station that transferred the call.
000~600
(seconds)
030
8
ACNR DELAY TMR(sec)
(000-300) : 030
If the ACNR Pause Timer expires and
no CO Line is available for ACNR
recall, the delay timer sets the delay
before ACNR attempts to access a
CO line. The retry counter is not
decremented by this action.
000~300
(seconds)
030
9
ACNR PAUSE TMR(sec)
(000-300) : 030
This timer establishes the time
between ACNR recall attempts.
000~300
(seconds)
030
10
ACNR RETRY COUNT
(01-13) : 03
This counter sets the number of recall
attempts for ACNR before ACNR is
abandoned. (For CIS : 1-9).
1~13 03
11
ACNR TONE DTC TMR(sec)
(001-300) : 030
If call progress tones are not available
for ACNR, the system will wait this
duration after dialing before
considering the called party as
busy/no answer.
001~300
(seconds)
030
12
AUTO RELEASE TMR(sec)
(000-300) : 030
If a user accesses a CO/IP path and
does not take any action, the system
will automatically release the CO/IP
path when this timer expires.
000~300
(seconds)
030
13
CCR INT DGT TMR(100ms)
(000-300) : 030
Inter-digit timer used with Customer
Call Routing function.
000~300
(100msec)
030