iPECS UCP - 2.51 IP TRUNKING; 2.51.1 H.323 v4 Service

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
161
Table 3.3.7.2-7 STATION GROUP ATTRIBUTES — UMS GROUP (PGM 191)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
4
UMS 410 ANNC2 LOC
VSF ANNC .. (01 – 70)
The Station Hunt Group can be
assigned a 2
nd
announcement,
which is played if the call remains
queued beyond the ANNC 2 TMR
duration. The announcement
location is the VSF ANNC2
number. An entry of 00 indicates
no announcement. Including ‘#’ at
the end of an entry instructs the
system to disconnect after the
announcement.
01~70 00: none
5
UMS 410 ANNC2 RPT TMR
(000 - 999) : 000.
The 2
nd
announcement can be
repeated to calls that remain in
queue at intervals of the
Announcement 2 Repeat Timer.
Note; repeating must be “ON”
under button 6 below.
000~999
(seconds)
000
6
UMS 410 ANNC 2 RPT
(1: ON / 0: OFF): OFF
After the 2
nd
announcement, if the
call remains queued to the group,
the 2
nd
VSF announcement can
be repeated at the Announcement
Repeat Timer interval.
0: OFF
1: ON
OFF
7
UMS 410 OVERFLOW DEST
S/H/V/SPD (Dial 1-4)
A call to the group will continue to
route through the group until
answered or all group members
have been tried. The call will
remain at the last station or routes
to the assigned Overflow
Destination.
1-4
(1:Station
2:Station group
3:VSF Announce
4:System speed)
8
UMS 410 OVERFLOW TMR
(000 - 600) : 180
A call to a group will remain at the
last station in the group or can be
sent to the assigned Overflow
Destination after expiration of the
OVERFLOW Timer.
000~600
(seconds)
180
9
UMS 410 NANS TMR(1s)
(00 – 99) : 15
Calls to a station in the group are
directed to the station, if
unavailable or unanswered in the
NO Answer Timer, the call can be
routed based on the assigned
hunt process.
00~99
(seconds)
15
10
UMS 410 PILOT HUNT
(1 : ON/ 0: OFF) : ON
A FS VM group can be set so that
only calls to the pilot number
(station group number) will hunt.
0: OFF
1: ON
ON
11
UMS 410 ALTER DEST
STA/HUNT
When a call comes into the group
and there are no group members
available, the call will be routed to
the assigned Alternate
Destination.
Station or Group
Number
....