iPECS UCP - Page 175

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
160
Table 3.3.7.2-6 STATION GROUP ATTRIBUTES — VSF-VM GROUP (PGM 191)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
VSF-VM 409 RETENSION (1d)
(00 – 99) : 00
When voice messages are stored in
the VSF, the system will maintain
(store) the message for the
maximum number of days set in this
program (1 to 99 days). (Not used
currently)
00-99
(day)
00
2
VSF-VM 409 DIAL TIME (1s)
(00 – 99) : 15
This timer determines the inter-digit
time employed during a VSF-VM
session. If this timer expires while
the VSF-VM is awaiting user input,
the system will assume the remote
party has disconnected and will
return the channel to idle.
00-99
(seconds)
15
3
VSF-VM GROUP NAME
……………………………….
A VSF-VM group name can be
designated.
20 character ….
Table 3.3.7.2-7 STATION GROUP ATTRIBUTES — UMS GROUP (PGM 191)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
UMS 410 ANNC 1 TMR(1s)
(000 - 999) : 015
If all stations in the group are
busy when a call is offered, the
call may continue to wait (queue)
for an available station.
If the queue period exceeds this
1
st
Announcement Timer, the call
may be sent to a VSF
announcement. If the timer is set
to 000, the call will receive the
first announcement, in full, prior to
the hunt process (guaranteed
announcement).
000~999
(seconds)
015
2
UMS 410 ANNC 2 TMR(1s)
(000 - 999) : 000
After the 1
st
announcement, the
2
nd
ANNC TMR is activated. At
expiration, if the call remains
queued to the group, the call is
sent to the assigned 2
nd
VSF
announcement.
000-999
(seconds)
000
3
UMS 410 ANNC1 LOC
VSF ANNC .. (01 – 70)
The Station Group can be
assigned an announcement,
which is played if the call remains
queued beyond the ANNC 1 TMR
duration. The announcement
location is the VSF ANNC1
number. An entry of 00 indicates
no announcement. Including ‘#’ at
the end of an entry instructs the
system to disconnect after the
announcement.
01~70 00: none