iPECS UCP - 2.85 Wake-up Alarm, Standard

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
260
Table 4.4.1.8-1 FLEXIBLE NUMBERING PLAN CODES
Order ATTRIBUTE DESCRIPTION DEFAULT
41
Direct Call Pick-Up
Dial code to activate Directed Call Pick-up.
*77
42
Access CO Group
Dial code to access a CO Line from a group.
89
43
Access Individual CO/IP
Dial code to access a specific CO/IP Line.
88
44
Access Held CO/IP
Dial code to access the last CO/IP Line from Hold.
8*
45 Access Held Individual CO/IP
Dial code to access a specific CO/IP Line from
Hold.
8#
46 Access CO In First CO Group
Dial code to access the 1
st
available CO/IP Line in
any accessible group.
9
47
Attendant Call
Dial code to call Main Attendant.
0
48 VM MSG Wait Enable
Dial code for external Voice mail to activate
Message Wait indication.
*8
49 VM MSG Wait Cancel
Dial code for external Voice Mail to deactivate
Message Wait indication.
*9
50
Door Open
Dial code to activate Door 1 contact.
#*1
51
Door Open
Dial code to activate Door 2 contact.
#*2
52
Door Open
Dial code to activate Door 3 contact only for UCP.
#*3
53
Door Open
Dial code to activate Door 4 contact only for UCP.
#*4
54 MCID Request
Dial code to activate Malicious Caller Id (Except
USA version).
*0
55
Unsupervised Conf Timer
Extend Code
Dial code to extend unsupervised conference
time.
##
56 PTT Group Logon/Logoff
Push-To-Talk group login and logout dial code.
The station must have a PTT button for proper
operation.
#0
57
ACD Agent Primary Login
ACD Agent Primary Login code.
*581
58
ACD Agent Primary Logout
ACD Agent Primary Logout code.
*582
59
ACD Agent Secondary Login
ACD Agent Secondary Login Code.
*583
60
ACD Agent Secondary Logout
ACD Agent Secondary Logout Code.
*584
61
Wrap-up End
ACD Agent Wrap-up end code.
*585
62 T-NET CM LOGIN/OUT T-NET CM Login/out code *586
63
ENTER INTO CONF ROOM
Code for a station to enter a conference room.
*59
64 ENTER INTO CONF-GROUP Code for a station to initiate a conference group. *68
65
STATION ICR
Code for a station to activate ICR forward.
*587
66 PICK UP GROUP PICK-UP Pick Up Group Call Pick-up dialing code. *588
67
EMERGENCY PAGE
Code for emergency page.
*589
68 REMOTE MEX CONTROL
Code to control the mobile extension settings
remotely.
*580
69
Agent ON/OFF Duty In ALL
GRP
Code to change the state of the Agent ON/Off
duty in all Station groups.
*58*
70 SLT ACNR Dial code for an SLT to activate ACNR *58#
71 ACD Supervisor Ring Mode
Code to check and change ACD group Ring mode
by ACD group supervisor.
*570
72 Company Directory Name
Code to check and record a user’s Name greeting
for the Company Directory feature.
*563
73 ISDN Supplementary HOLD
ISDN Supplementary HOLD Numbering Plan
Code.
*57*
74
ISDN Supplementary
Conference
ISDN Supplementary Conference Numbering Plan
Code (Not supported).
*57#