iPECS UCP - Page 276

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
261
Table 4.4.1.8-1 FLEXIBLE NUMBERING PLAN CODES
Order ATTRIBUTE DESCRIPTION DEFAULT
75 Forced Channel Seize
Code to disconnect an existing call and seize the
CO/IP Line or connect to the station.
*56*
76 Override DND/Forward
Dial code to override DND or Call Forward
activated by a station.
*56#
77
Cancel call back
Code to cancel a Callback request.
78 Transfer to VSF Number
While on a CO/IP Line call, this code may be used
to transfer a call to a valid system announcement,
[Transfer] + [*55*] + valid system announcement
(01-200). The outside party receives the system
announcement and DISA service activates.
*55*
79
CCR
It is used in digit conversion.
#2
80 Room Type Conf Group Join
After a UCS client activates a UCS Conference
Group, other users may dial this code and the
group number to enter the Conference.
5*0