iPECS UCP - Page 351

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
336
Table 4.4.4.11-1 CID/CPN ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Choice incoming CLI
Incoming CLI Choice – When ISDN setup message has
two CLIs (Transit Point CLI / Original CLI), this option
determines the CLI the system will recognize.
Original CLI/
Transit Point CLI
Transit point
CLI
Calling party
numbering Plan
ISDN Calling Party Numbering Plan can be configured.
Unknown,
ISDN/Telephony,
Data/Numbering,
Telex,
National Std,
Private,
Reserved
ISDN/
Telephony
Called party
numbering Plan
ISDN Calling Party Numbering Plan can be programmable.
Unknown,
ISDN/Telephony,
Data/Numbering,
Telex,
National Std,
Private,
Reserved
Unknown
Station CLI Type
When the Station CLI is used with the CLIP or CLOP, one
of five Station CLIs as defined in PGM 114 section 4.4.7.2
is used for this CO/IP Line as selected here.
Station CLI 1 –
Station CLI 5
Station CLI
1
DID Remove Number
When a DID call is received on an ISDN Line, this entry
determines the number of digits that will be removed
starting at the first received digit.
00~99 00
One Digit Remove
Selects one digit remove mode in ISDN Called Digits for
Italy DID.
Enable
Disable
Disable
CID mode
The type of CID signal can be assigned according to the
type of CID from the carrier.
Disabled/
FSK/
DT-AS(TAS) FSK/
DTMF/
RCID
FSK
RCID detect Russia CID Detect Mode.
LOCAL/
ALL
ALL
RCID request Russia CID Request Mode.
USER/
AUTO
AUTO
RCID Request First
Delay Timer
Russia CID First Delay Timer.
010–150
(10msec)
30
RCID No-Answer
Timer
Russia CID NO–Answer Timer.
001–300
(Sec.)
20
RCID Digit Number
Russia CID Digit Number.
04–10
07
RCID Request Count
Russia CID Request Count.
1–3
1
RCID Request Retry
Delay Timer
Russia CID Retry Delay Timer.
10–30
(10msec)
10