iPECS UCP - 5.8 DND -One-Time DND

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
342
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Attendant Call Queued
Ring Back Tone
When Attendant is busy with receiving call, the
system will provide either Ring-back tone or
Background music (MOH). If MOH is selected, the
Music Source must be defined in ‘Music source –
PGM171’.
MOH/
Ring-Back Tone
MOH
Camp-On MOH/Ring-
Back Tone
When Camp-On is used, the calling station will
receive either ring-back tone or MOH. If MOH is
selected, a source must be defined in ‘Music source –
PGM171’.
MOH/
Ring-Back Tone
MOH
CO Dial Tone Detect
The system can use dial-tone detection or a timed
pause for speed dial numbers that contain a Pause.
OFF
ON
OFF
CO Line Choice
CO Lines are selected by the system from groups
using either the LAST used, FIRST or ROUND robin
method.
LAST
FIRST
ROUND
LAST
DISA Retry Count
A DISA user is allowed to retry erroneous
authentication code entries. This entry sets the
number of retries before the system disconnects.
1~9 3
External Night Ring
CO/IP calls, which are assigned UNA, can activate
the Loud Bell Contact. While in the Night mode, an
incoming call will activate the contact.
OFF
ON
OFF
Hold Preference
A single depression of the [Hold] button places the
call on the preferred hold, System or Exclusive.
System/
Exclusive
System
Print LCR Converted
digits
SMDR will output the number dialed by either the
system’s LCR or the user.
LCR/
USER
LCR
Attendant Call Queuing
The system can be configured to queue incoming
calls to a busy Attendant.
OFF
ON
OFF
USE PGM_0 IN ALL
ATD
This field allows Main Attendants to activate
Day/Night mode and other System Attendant menus
except PGM 06 – Record system announcement.
(Not available in USA version.)
OFF
ON
OFF
Off-net Prompt Usage
When a call is routed to a destination external to the
iPECS, the Off Net routing prompt can be played.
(Not available in US version)
OFF
ON
ON
CO to CO
Unsupervised
Conference Timer
Extend
When an Unsupervised Conference is established
with DISA, Off-Net Fwd, etc., the Unsupervised
Conference timer determines the allowed duration of
the call. If enabled here, the user may extend the
allowed duration.
OFF
ON
OFF
ACD Manager Print
When the optional ACD Event messages are
required, the system must be enabled here to send
the events.
OFF
ON
OFF
CALL LOG Number
The Call Log saves the Outgoing call, Received call,
or Lost call information and can be displayed by
pressing Call Log Display Button. The maximum size
of the Call Log per station is defined here.
15~50 15
Repeat DTMF tone
If enabled, the system will repeat DTMF tones to the
caller’s station when the call is routed to an off-net
location.
OFF
ON
OFF