iPECS UCP - Page 426

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
411
Table 4.4.6.3-1 TERMINAL & CIRCULAR GROUP ATTRIBUTES
ATTRIBUTE − DESCRIPTION RANGE DEFAULT
place of ring-back tone. External Music/
VSF MOH/
SLT MOH1~5/
VSF MOH2~3
Allow Forward Member
A member activating Call forward may be placed in an
unavailable state for Station group calls (ON). When
OFF, group calls are sent to the member as normal
(OFF).
OFF
ON
ON
Mailbox Message Wait
Station
When a call overflows or routes to the VM group, a
station number is used to identify the Mailbox for the
group messages.
Station Number
Mailbox Password
The password associated with a group Mailbox is defined
here. The password is used in conjunction with the group
Mailbox as with a normal station.
Max. 12 digits
Forced Forward
Destination
Calls to a Station group may forward directly to a defined
destination, bypassing the hunt process. “Forced
Forward”, below, must be enabled.
STA./NET or
Station group/
VSF
Announcement/
Sys. Speed
Forced Forward
Destination Usage
Calls to a Station group may forward directly to a defined
destination, see above “Forced Forward Destination”
when Forced Forward is enabled for the group.
OFF
ON
OFF
Group Name A name can be designated for the group.
Max. 12
characters
Maximum Queued Call
Counter
When the number of calls queued to the group match
this parameter, new calls will receive error tone and be
disconnected after the VSF Announcement 1, if
assigned, is played.
00-99 99