iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
443
Table 4.4.8.1-1 SIP Common Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Primary DNS
Name Resolution Server.
System will be restarted after Save.
IP Address
Secondary DNS
Name Resolution Server.
System will be restarted after Save.
IP Address
Local Server UDP
SIP UDP signaling port.
System will be restarted after Save.
5060
Local Server TCP
SIP TCP signaling port.
System will be restarted after Save.
5060
Local Server TLS
SIP TLS signaling port.
System will be restarted after Save.
5061
Check Message
Send Timer
Keep Alive (OPTIONS Message) sending frequency
0, 10 ~ 3600
(Sec.)
0
Signal TLS option
TLS Version
TLS version.
TLS1.0: TLS1.0 is used for TLS connection.
TLS1.2: TLS1.2 is used for TLS connection.
SSL3(Auto) : TLS1.0 or TLS1.2 is used – auto
negotiation
System will be restarted after Save.
TLS1.0/
TLS1.2/
SSL3(Auto)
TLS1.0
Crypt Mode
TLS Crypt Mode.
System will be restarted after Save.
RSA/ECC RSA
First TLS
SIP signaling TLS encryption primary key method.
System will be restarted after Save.
None/
ARIA-128/
AES-128/
ARIA-128-SHA2/
AES-128-SHA2/
None
Second TLS
SIP signaling TLS encryption secondary key method.
System will be restarted after Save.
None/
ARIA-128/
AES-128/
ARIA-128-SHA2/
AES-128-SHA2/
None
Persistent Level
TLS signaling path method
TRANSACTION : different path with INVITE, INFO,
MESSAGE
TRANSACTION_USER : same path with INVITE, INFO,
MESSAGE
System will be restarted after Save.
TRANSACTION/
TRANSACTION_USE
R
TRANSACTI
ON_USER
Capacity Level
TLS session maintenance rate, maximum 70%.
System will be restarted after Save.
0 - 100 70
TLS session maintain or not.
OFF
ON
System Cert File
Format
The system supports two certification formats Privacy-
Enhanced Electronic Mail (PEM) or Distinguished
PEM(Normal)
DER (Normal)
PEM
(Normal)
System Cert Key
Password to encrypt private key. Max. 16 characters