iPECS UCP - 2.7.12.2 Agent Status Control

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
32
Table 3.3.2.5-2 FLEXIBLE NUMBERING PLAN PART B (PGM 107)
BTN DISPLAY FEATURE DEFAULT
14
STA USER VSF FEATURES
ENTER NEW #:*66
VSF feature access code. *66
15
CALL COVERAGE RING
ENTER NEW #:76
Code for Call Coverage button. 76
16
DIRECT CALL PICK-UP
ENTER NEW #:*77
Dial code to activate Directed Call Pick-
up.
*77
17
ACCESS CO GROUP FEAT
ENTER NEW #:89
Dial code to access a CO Line or IP
channel from a CO/IP group.
89
18
ACCESS IND CO/IP FEAT
ENTER NEW #:88
Dial code to access a specific CO Line. 88
19
ACCESS HELD CO/IP FEAT
ENTER NEW #:8*
Dial code to access last held CO Line or
IP channel from Hold.
8*
20
ACCESS HELD IND CO/IP
ENTER NEW #:8#
Dial code to access a specific CO Line/IP
channel from Hold.
8#
21
ACCESS CO IN 1ST CO GRP
ENTER NEW #:9
Dial code to access the 1st available CO
Line in any accessible group.
9
22
ATTENDANT CALL
ENTER NEW #:0
Dial code to call an Attendant. 0
23
VM MSG WAIT ENABLE
ENTER NEW #:*8
Dial code for external Voice mail to
activate Message Wait indication.
*8
24
VM MSG WAIT CANCEL
ENTER NEW #:*9
Dial code for external Voice Mail to
deactivate Message Wait indications.
*9
Table 3.3.2.5-3 FLEXIBLE NUMBERING PLAN PART C (PGM 108)
BTN DISPLAY FEATURE DEFAULT
1
DOOR OPEN 1
ENTER NEW #:#*1
Dial code to activate Door 1 contact
(open door 1)
#*1
2
DOOR OPEN 2
ENTER NEW #:#*2
Dial code to activate Door 2 contact
(open door 2).
#*2