iPECS UCP - 2.7.12.3 Group Status Display

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
33
Table 3.3.2.5-4 FLEXIBLE NUMBERING PLAN PART D (PGM 109)
BTN DISPLAY FEATURE DEFAULT
1
MCID REQUEST
ENTER NEW #:*0
Dial code to activate Malicious Call ID
Request in ISDN Supplementary service.
Not available in USA version.
*0
2
AME FEATURE
ENTER NEW #: 564
Dial code to assign an Answering
Machine Emulation Flex button.
564
3
US-CONF TMR EXTENSION
ENTER NEW #:##
Dial code to extend Unsupervised
conference time.
##
4
PTT GROUP LOGIN/OUT
ENTER NEW #:#0
Push-To-Talk group login and logout dial
code. The station must have a PTT
button for proper operation.
#0
5
ACD AGENT P LOGIN
ENTER NEW #:581
ACD Agent Primary Login code. 581
6
ACD AGENT P LOGOUT
ENTER NEW #:582
ACD Agent Primary Logout code. 582
7
ACD AGENT S LOGIN
ENTER NEW #:583
ACD Agent Secondary Login code. 583
8
ACD AGENT S LOGOUT
ENTER NEW #:584
ACD Agent Secondary Logout code. 584
9
ACD AGENT WRAPUP END
ENTER NEW #:585
ACD Agent wrap-up end code. 585
10
TNET CM LOGIN/OUT
ENTER NEW #:586
When Central Control networking (TNET)
is employed, a station can be manually
logged in or out of the Central system
using this code.
586
11
ENTER INTO CONF-ROOM
ENTER NEW #:59
Code for a station to enter a conference
room.
59
12
ENTER INTO CONF-GROUP
ENTER NEW #:68
Code to open a conference group. 68
13
STATION ICR
ENTER NEW #:587
Code to activate Station ICR. 587
14
PICK UP GROUP PICK-UP
ENTER NEW #:588
Pick Up Group Call Pick-up dials code. 588
15
EMERGENCY PAGE
ENTER NEW #:589
Code for emergency page. 589
16
REMOTE MEX CONTROL
ENTER NEW #:580
Code to control the mobile extension
settings remotely.
580