iPECS UCP - Page 470

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
455
Table 4.4.8.3-1 SIP CO ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Unused: no Diversion header provided.
Extension: the Extension SIP User ID or
Extension Outgoing CLI as assigned for the From
ID under ID Individuality.
Original CLI: the CLI received by the system for
the original incoming call.
Fixed Table: the SIP User ID from the SIP UID
Fixed Table Index attribute assigned below.
Fixed Table
Mobile Extension External Call
The below applies to calls routed to a Mobile Extension over a SIP Trunk
From/Contact ID
The Id in the “From” and “Contact” headers of SIP
messages employ the calling station, the original
CLI or a fixed User ID.
Extension: the Extension SIP User ID or
Extension Outgoing CLI as assigned for the From
ID under ID Individuality.
Original CLI: the CLI received by the system for
the original incoming call or Station number for ICM
call.
Fixed Table: the SIP User ID from the SIP UID
Fixed Table Index attribute assigned below.
Extension/
Original CLI/
Fixed Table
Extension
From Display
The “Display” field of the “From” header can be
configured to use the below:
System Rule:
a. From ID = Extension, display Contact
Display Name from PGM 126, otherwise display
Station Name from PGM 111 or blank.
b. From ID = Original CLI, display Station
Name from PGM 111 for ICM call or the Name in
received by the system for the original outside call.
c. From ID = Fixed Table display Contact
Display Name from PGM 126 or blank.
Original CLI: the CLI received by the system for
the original incoming call.
SYS RULE/
Original CLI
SYS RULE
P-Asserted-ID
The Id in the “P-Asserted Id” header of SIP
messages employ the calling station, the original
CLI or a fixed User ID.
Extension: the Extension SIP User ID or
Extension Outgoing CLI as assigned for the From
ID under ID Individuality.
Original CLI: the CLI received by the system for
the original incoming call or station number for ICM
call.
Fixed Table: the SIP User ID from the SIP UID
Fixed Table Index attribute assigned below.
Extension/
Original CLI/
Fixed Table
Extension
P-Asserted-ID Display
The “Display” field of the “P-Asserted ID” header
can be configured to use the below:
System Rule:
a. P-Asserted ID = Extension, display Contact
SYS RULE/
Original CLI
SYS RULE