iPECS UCP - Page 556

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
541
Table 4.4.13.6-1 ZONE ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
(it is for incoming CLI)
Leading Zero
Insertion for Area
code
For an outgoing call, the system can insert a zero (‘0’) in
front of area code.
No
Yes
No
My Area Code
Insertion
For an outgoing call, the system can insert my area code
in the CLI.
No
Yes
No
Exceptional Conversion : for Outgoing Dial Number
Conversion Case
#1
The first digits, up to four (4), dialed by the user can be
converted to a digit string of up to six (6) digits and may
include a plus (+) sign. For example if the “From” digits
are 00 and the “To” digits are +820, if the user dials
002233432, the system converts the number to +820
2233432.
From (4-digits) and
To (6-digits)
Conversion Case
#2
Conversion Case
#3
Conversion Case
#4
Conversion Case
#5
Exceptional Conversion : for Incoming CLI Number
Conversion Case
#1
The first digits, up to four (4), received as the CLI can be
converted to a digit string of up to six (6) digits and may
include a plus (+) sign. For example if the “From” digits
are 00 and the “To” digits are +820, if the user dials
002233432, the system converts the number to +820
2233432.
From (4-digits) and
To (6-digits)
Conversion Case
#2
Conversion Case
#3
Conversion Case
#4
Normal Zone Management Information
Language Code Language code of devices in the zone. Language Code
Nation
dependent
Codec Type Assigns the codec employed by devices in the Zone.
System codec
G.711
G.723.1
G.729
G.722
System codec
RTP Relay Rule
Assigns when to use the packet relay function, with “If
Need” the MPB will automatically determines when to use
packet relay, while “RTP Relay Group” will always
implement packet relay for RTP packets.
If need/
Relay Group/
Forced to Relay
If need
1st RTP Relay
Device Slot Seq.
Assigns the local VOIU or VOIB IP channels that will be
used to implement packet relay for devices in the Zone.
Sequence
Number
eMG80:13
eMG800:19
2nd RTP Relay
Device Slot Seq.
Back-up VoIP channels for RTP packet relay use in the
Zone.
Sequence
Number
eMG80:14
eMG800:NA
VM Device Slot
Sequence
(VMIU/VMIB Slot
Sequence)
Assigns the UVMU/UVM/VMIU/VMIB used to support
Voice Mail for devices in the Zone. The
UVMU/UVM/VMIU/VMIB must be under control of the
same MPB/UCP as the device being assigned.
Sequence
Number
eMG80: 2
(1:15/2:16)
eMG800: 3
Remark Descriptive information to help installer/programmer in Max. 21 characters