iPECS UCP - Page 61

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
46
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
24-14
100 – 110 VSF S-
MAILADDR
…………………………
When VSF mail sending, Sender
Mail Address can be program.
24-15
100 – 110 PREPAID CALL
(1:ON/0:OFF) : OFF
Enable prepaid call service. 0: OFF
1: ON
OFF
24-16
100 – 110 PREPAID
MONEY
000000
Prepaid Money can be entered.
By Call Metering signal, pre-paid
money can be calculated.
000000 -
999999
0
24-17
100 – 110 DEFAULT VM NO
….
Default VM group number used
when users press the [Msg/Call
Back] button and there is no
message.
24-18
100 – 110 SLT MODE
(0-3) : DEFAULT
SLT configuration mode.
It is used only for South Africa.
SLT gain is changed cording to this
configuration.
0: Default
1: Short
2: Long
3: Far
Default (0)
24-19
100 – 110 OFF HOOK RING
(0-3) : REFER TO SYS
Off hook ring type could be selected
by station base.
0: BURST
1: MUTE
2: SYSTEM
3:SILENCE
Refer to System
(2)
24-20
100 – 110 SIP COLOR
RING
…..
Color ring is provided from assigned
SIP VM (UMS).
SIP extension number that is
connected to SIP VM (UMS) server
should be assigned.
24-21
100 – 110 FORCED ACNT
(1:ON/0:OFF) : OFF
User should enter an Account Code
prior to placing an outgoing call
when this value has “ON”.
0: OFF
1: ON
OFF
24-22
100 – 110 FLEX BTN PGM
(1:ON/0:OFF) : ON
A user can program Flex buttons at
station.
0: OFF
1: ON
ON
24-23
100 – 110 STNWEB_LEVEL
(1-3) : LEVEL 1
There are 3 access levels that can
be assigned to station.
The station with level 1 can
view/access all programs in station
web.
The station with level 2/3 follows
Station Web Authorization menu
(System Data -> Station Web
Authorization).
LEVEL 1 ~
LEVEL 3
LEVEL 1
24-24
100 – 110 HEADSET PAGE
(1:S/2:H/3:BOTH): SPKR
Paging is provided on selected
device (SPEAKER/HEADSET/Both)
while in the headset mode.
1~3
(SPKR/
HEADSET/
Both)
1: SPKR