iPECS UCP - Page 60

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
45
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
24-5
100-110 VSF DEL MSG
(1:ON/0:OFF) : OFF
When ON, delete VSF messages
when send UMS e-mail notification.
0 : OFF
1 : ON
OFF
24-6
100-110 VM PWD CHECK
(0-2) : STN&PWD
When ON, check password when a
user access to the VSF messages.
0 : No
Password
1 : PWD only
2: station
number and
Password
2: station
number and
Password
24-7
100-110 BARGE IN MODE
(0-2) : DISABLE
Barge in permits an authorized
extension to intrude into other
existing outside/internal calls or to
disconnect existing call forcedly.
If 0, Barge In is disabled.
If 1, Barge In monitors other
conversation.
If 2, Barge In monitor join and
Forced Disconnect.
0: Disable
1: Monitor
2:Monitor&Join
& Disconnect
Disable
24-8
100 – 110 SLT FLASH
MODE
(0-3) : FLASH TRANSFER
SLT Flash works as following option.
0: Flash Transfer – Flash detected,
then the line is held and the line
goes to waiting state.
1: Flash Drop - Flash detected and
Line is disconnected.
2: Flash Ignore – Flash detected, but
Ignored.
3: Hold Release – Flash detected,
then the line is held and the line
goes to waiting state.
And the SLT user goes on-hook,
then the held line is disconnected,
not recalling.
0: Transfer
1: Drop
2: Ignore
3: Hold Release
Transfer
24-9
100 – 110 RLS COST DISP
(1:ON/0:OFF) : OFF
When CO line is released, according
to admin option, call-cost or
disconnection-cause can be
displayed to user LCD.
0 : OFF
1 : ON
OFF
24-10
100 – 110 LDT TBL INDEX
(00-10) : 01
LCR will be operated with this LDT
table index
No. of LDT
Table
1
24-11
100 – 110 WEB CALL BACK
(1:EN/0:DIS) : DISABLE
Enable Web call back service. When
enabled, call back service on station
web admin could be used.
0: Disable
1: Enable
Disable
24-12
100 – 110 VSF SMTP SECU
(0-2) : NO SECUTIRY
Security for VSF mail sending can
be chosen.
0: No Security
1: SSL
2: TSL
No Security
24-13
100 – 110 VSF SMTP PORT
(00001-65535) : 00025
When VSF mail sending, SMTP port
can be program.
00001 – 65535 25