iPECS UCP - Page 59

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
44
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
18
100-110 VSF MailSvrIP
……………………………..
The VMIB includes notification of
new messages to the user’s e-mail.
This field displays the user’s e-mail
mail server for the notification. Use
Web Admin PGM 132 to modify this
value.
IP v4 address
Or Mail server
name
19
100-110 VSF Mail Addr
…………………………..
The VMIB includes notification of
new messages to the user’s e-mail.
This field displays the e-mail
address to notify when a new
message is received at the VMIB.
Use Web Admin to modify this value.
e-mail address
20
100-110 BLOCK B-CALL
(1:ON/0:OFF) : OFF
When an SLT extension tries to
transfer a CO call to a CO line it is
blocked and the call is released.
0 : OFF
1 : ON
OFF
21
100-110 BY PASS DTMF
(1:ON/0:OFF) : OFF
When detected, DTMF from an SLT
may be regenerated by the analog
CO line ports, the SLT port can by-
pass detection so DTMF is not
detected.
0 : OFF
1 : ON
OFF
22
100-110 PROCTOR MONIT
(1:ON/0:OFF) : OFF
Enables use of PABX ANI Link
device for E-911 support, Only an
SLT can be used for this feature.
0 : OFF
1 : ON
OFF
23
100-110 VSF MailSvrID
………………………
The VMIU and VMIB include
notification of new messages to the
user’s voice mail. This field defines
the user’s ID to notify when a new
message is received at the VMIU or
VMIB.
24
ADDED STATION ATT3
PRESS FLEX KEY (01-24)
01-24
24-1
100-110 VSF MailSvrPW
………………………
Unified Mail server password
24-2
100-110 DOOR OPEN
(1:EN/0:DIS) : ENABLE
Enables use of Door open feature by
station - Default value :
Australia : Disable except for port
1or2
Otherwise : Enable
0: Disable
1: Enable
Enable
24-3
100-110 VSF MSG DD/TM
(1:ON/0:OFF) : ON
When ON, play the date/time stamp
of VSF message.
0 : OFF
1 : ON
ON
24-4
100-110 OGM DEST
NOT ASSIGNED
Assign Mail box destination. When a
user dial attendant code (‘0’ or ‘9’), if
it is assigned then the call will be
delivered to assigned mail box
destination instead of attendant. If it
is not assigned then the call will be
delivered to attendant.
NOT
ASSIGNED