iPECS UCP - Page 652

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
637
Table C-3 STATION DATA
BTN SUB-MENU RANGE DEFAULT REMARK
2 COLP Display 1: ON, 0: OFF OFF
3 Progress Indication 1: ON, 0: OFF OFF
4 CLIR Service 1: ON, 0: OFF OFF
5 COLR Service 1: ON, 0: OFF OFF
6 Station CLI 1 Max 12 digits Station No
7 3.1 kHz Audio 1: ON, 0: OFF OFF
8 CLI Name Display 1: ON, 0: OFF OFF
9 CLI/IP Redirect Display 1: Red, 0: CLI CLI
10 CLI Message Wait 1: ON, 0: OFF OFF
11 EXT OR ATD 1: ATD,0: EXT EXT
12 MSN Wait 1: ON, 0: OFF OFF
13 Unused
14 DID Restriction 1: ON, 0: OFF OFF
15 DISA Restriction 1: ON, 0: OFF OFF
16 Unused
17 Modem Enable 1: ON, 0: OFF OFF
18 FAST CLI For Transfer Call 1: ORI, 0: TRN TRN
19 Unused
20 PICK UP By Flex Button 1: ON, 0: OFF ON
21 Multi Language Prompt 1 – 6 1
22 Pre-Sel Msg DND 1: ON, 0: OFF OFF
23 Pre-Sel Msg Language
Prompt 1 – 6 1
24 Added station attributes
24-1 Station CLI 2 Max 16 Chars Station No
24-2 Station CLI 3 Max 16 Chars Station No
24-3 Station CLI 4 Max 16 Chars Station No
24-4 Station CLI 5 Max 16 Chars Station No
24-5 SLT CID type (0:FSK/1:DTMF) FSK
24-6 Wakeup announcement 0-200 0
24-7 Camp on enable
0: OFF
1: ON
ON
24-8 Gain table 1–3 1
24-9 Tone table 1–5 1
24-10 Digit conversion table
eMG80: 1-15
eMG800: 1-32
0
24-11 Video on calling 1: ON, 0: OFF OFF
24-12 E.164 CLI To 1: ON, 0: OFF OFF
24-13 Flexible page 1-3 3 page
24-14 Align LCD 0-2 0
0: Not align, 1: Left, 2: Right
24-15 Two way recording 0-200 00
24-16 LDT Zone 001-100 001
24-17 ECM Fax (T38) 1: ON, 0: OFF ON
24-18 Display restrict 1: ON, 0: OFF OFF
24-19 Small popup use 1: ON, 0: OFF OFF
24-20 Large popup timer 0-5 0
24-21 MWI LED 0-4 0
0:ALL MWI, 1:VM MWI
2: CLI MWI, 3: SMS MWI
4: ICM MWI
24-22 NFC Auth use 1: ON, 0: OFF ON