iPECS UCP - Page 659

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
644
Table C-5 CO LINE DATA
BTN SUB-MENU RANGE DEFAULT REMARK
2: Wink
3: Delayed Dial
2 DID conversion Type 0-2 1
0: DID Data Conversion
(PGM230)
1: call to the valid extension.
2: convert with Flex DID Table
(PGM231)
3 DID Digit Receive Number 2-4 3
4 DID Digit Mask 4 digits #***
PGM: 146 - DISA Service Attributes
DISA (Day/Night/Timed Ring)
Flex 1: Day
Flex 2: Night
Flex 3: Timed
Enter VMIB/VMIU
Announcement number.
PGM: 147 - CO Preset Forward Attributes
1 CO Preset Forward Timer 00~99 00 1 second increments
2 ICLID Ring Table Index 001~250 None
3 VMID Number 0000~9999 None
PGM: 148 – CO Additional Attribute
1 CID type
0: Disabled
1: FSK
2: DTAS FSK
3: DTMF
4: Russian CID
FSK
2 RCID detect
0: LOCAL
1: ALL
ALL
3 RCID request
0: USER
1: AUTO
AUTO
4 RCID request first delay timer 10-150(10msec) 20
5 RCID no answer timer 1-300(sec) 20
6 RCID digit number 4-10 7
7 RCID request count 1-3 1
8 RCID request retry delay timer 10-30(10msec) 10
9 COLLECT CALL BLOCKING
0: Disabled
1: Double Answer
2: With Indication
Disabled
10 COLLECT CALL ANSWER TIMER 1-250 10
11 COLLECT CALL IDLE TIMER 1-250 20
12 Analog line monitoring ON/OFF ON
13 Ring detection register 000-255 000
PGM: 150 - NA ISDN Line Attributes
1 Local Exchange Type 1~4 NI 1
1: NI 1
2: NI 2
3: 5 ESS
4: NORTEL
2 SPID Number 9~23 digits
3 Directory Number 23 digits
4 EKTS Mode 1:EKTS /0:NONE NONE
5 Type for 1/2/3 0~5 0
0: Unknown
1: International