iPECS UCP - Page 658

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
643
Table C-5 CO LINE DATA
BTN SUB-MENU RANGE DEFAULT REMARK
3: Australia
4: Belgium
5: ETSI Standard
10 ISDN Line Type 1: μ-Law, 0: A-Law μ-Law
11 Calling Sub-address 1: ON, 0: OFF OFF
12 Incoming Prefix Code Insertion 1: ON, 0: OFF OFF
13 Outgoing Prefix Code Insertion 1: ON, 0: OFF ON
14 International Access Code Max 4 digit
15 My Area Code Max 6 Digits
16 My Area Prefix Code Max 4 Digits
17 CLI Transit Code 1: ORI 0: CFW CFW
18 Preserve Name for DID calls 1: ON, 0: OFF OFF
19 ISDN Redirecting number No SVC / ORI/CFW No SVC
20 Choice Incoming CLI
Transit Point CLI
/ Original CLI
Transit Point
CLI
21 Calling Party Numbering Plan 0-6 1
0: Unknown.
1: ISDN / Telephony.
2: Data / Numbering.
3: Telex.
4: National Standard.
5: Private.
6: Reserved.
22 Called Party Numbering Plan 0-6 0
0: Unknown.
1: ISDN / Telephony.
2: Data / Numbering.
3: Telex.
4: National Standard.
5: Private.
6: Reserved.
23 Screening Indicator 0-3 0
0: User Provided, No Service.
1: User Provided, Pass.
2: User Provided, Fail.
3: Network Provided.
24 Added CO line attributes
24-1 Station CLI Type Station CLI 1-5 Station CLI 1
24-2 ISDN PLUS Code Max 4 digits -
24-3 CP/ALERT INBAND 1: ON, 0: OFF OFF
24-4 Disconnect INBAND 1: ON, 0: OFF OFF
24-5 Bursting to Caller 1: ON, 0: OFF OFF
PGM: 144 - CO Ring Assignment
1 Day Station/Group
Dial 1: Station + Delay (0~9
ring cycles)
Dial 2: Hunt group
Dial 3: VSF announcement
(01~70)
Dial 4: AA Ring delay Time
(00~30 sec.)
2 Night Station/Group
3 Timed Ring Station/Group
PGM: 145 - DID Service Attributes
1 DID Signal 1: Immediate Wink