iPECS UCP - Page 661

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
646
Table C-5 CO LINE DATA
BTN SUB-MENU RANGE DEFAULT REMARK
3 Dial-Tone Delay Time 02~50 10 100 msec increments
4 Inter-Digit Time 15~30 15 20 msec increments
5 Wink Time 07~15 10 20 msec increments
6 Pulse Rate 0~3 0
0 : 60-40(10pps)
1 : 66-33(10pps)
2 : 60-40(20pps)
3 : 66-33(20pps)
7 Seize DTC Time 0~127 3 20 msec increments
8 Release Time 0~127 7 20 msec increments
9 Address Signaling Type 1:DTMF, 0:Pulse DTMF
10 Ring Start Time 2~9 2 100 msec increments
11 Ring Stop Time 10~60 60 100 msec increments
12 Collect Digit 1~6 3
13 Digit Store Time 01~15 15 1 sec increments
PGM: 153 - DCOB CO Line Attributes
1 Line Status 1~9 6
2 DNIS Service 1: ON, 0: OFF OFF
3 Number of CLI Digits 01-15 10
4 DCOB Type 0-2 2
5 Call Category 1-9 1
6 DID Digit number 00~32 0
Table C-6 SYSTEM DATA
BTN SUB-MENU RANGE DEFAULT REMARK
PGM: 160 - System Attributes I
1
Attendant Call Queuing Ring-
Back Tone
1: RBT, 0: MOH MOH
2 Camp-on, MOH/Ring-Back Tone 1: RBT, 0: MOH MOH
3 CO Dial-Tone Detect 1: ON, 0: OFF OFF
4 CO Line Choice 0 ~ 2 Last
0: Round Robin,1: Last Used,
2: First
5 DISA Retry Counter 1~9 3
6 External Night Ring 1: ON, 0: OFF OFF
7 Hold Preference 1: Sys, 0: Excl System System/Exclusive Hold
8 Print LCR Converted Digit 1: LCR, 0: User LCR
9 Attendant Call Queue Available 1: ON, 0: OFF OFF
10 All Attendant PGM ‘0’ Access 1: ON, 0: OFF OFF (Except USA version)
11 Off-Net Prompt Usage 1: ON, 0: OFF OFF (Except USA version)
12
Unsupervised Conf Timer
Extension
1: ON, 0: OFF OFF
13 ACD Information Print 1: ON, 0: OFF OFF
14 Call Log List Number 15 ~ 50 15
15 Off-net DTMF Tone 1: ON, 0: OFF ON
16 Authorization Retry Counter 1 ~ 9 3
17
Conference Room Telephone
number
8 digits