iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
647
BTN SUB-MENU RANGE DEFAULT REMARK
18 MPB DIFFSERV 00-63 04
19 UPGRADE MODE 1: FTP, 0: TFTP FTP
20 TRANSFER TONE 1: RBT, 0: MOH RBT
21 CONF WARN TONE 1: ON, 0: OFF ON
22 TLS for WEB 1: ON, 0: OFF OFF
23 DUMMY DIAL TONE 1: ON, 0: OFF OFF
24 ADDED ATTR
ADDED ATTR
24-1 SIP STA MODE 0: RTD, 1: PTP RTD
24-2 SYS AUTH END CODE 0: OFF, 1: ON OFF
24-3 STN VM FEATURE USAGE 0: OFF, 1: ON ON
24-4 Remote VM access
24-5 Transfer Tone usage
24-6 LCR Dial tone detect
24-7 ICM Call log
24-8 ATD password usage
24-9 Pickup STA name usage
24-10 Display LCR mode
24-11 Easy 5 wake up usage
24-12 WEB login usage
24-13 VM MEX notify over LCO
0: DISABLE
DISABLE
24-14 Modem ASC CO line
24-15 Meet me soft display
24-16
Device information request
interval time
015-255 015
24-17 Number of CLI Wait list
PGM: 161 - System Attributes II
1 Off-Hook Ring Signal Type 1: Mute, 0: Burst Mute
2 Page Warning Tone 1: ON, 0: OFF ON
3 Privacy 1: ON, 0: OFF ON
4 Privacy Warning Tone 1: ON, 0: OFF ON
5 ACD PRNT Enable 1: ON, 0: OFF OFF
6 ACD PRNT Timer 001~255 10 10 second increments
7 ACD Clear after PRNT 1: ON, 0: OFF OFF
8 Override 1
CO Group 1: ON, 0: OFF ON
9 Base Codec Type 0-3 G711
0: G711, 1: G.723.1, 2: G.729,
3: G.722
10 G.711 Packetization 10/20/30 20 1 msec increments
11 G.723 Packetization 30/60 30 1 msec increments
12 Network Time/Date
0: DISABLE
1: ISDN CLOCK
DISABLE
(USA version do not support
ISDN CLOCK)
13 Incoming Call Toll Check 1: ON, 0: OFF ON
14 Web Server TCP port 00001~65535 00080
15 Web Password Security 1: ON, 0: OFF OFF
16 Old Auth. Code Usage 1: ON, 0: OFF ON
17
COS 7 on Auth code entry
failure
1: ON, 0: OFF OFF