iPECS UCP - Page 664

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
649
Table C-6 SYSTEM DATA
BTN SUB-MENU RANGE DEFAULT REMARK
1 Alarm Enable 1: ON, 0: OFF OFF
2 Alarm Contact Type
1: Close,
0: Open
Close
3 Alarm/Door Bell Mode
1: Alarm,
0: Door-Bell
Alarm
4 Alarm Signal Mode
1: Repeat,
0: Once
Repeat
5 Emergency call notification
0: OFF
1: ON
ON
6 DCOB Fault notification
0: OFF
1: ON
ON
7 SIP registration fault notification
0: OFF
1: ON
ON
PGM: 164 - Attendant Assignment
1 Attendant Assignment Station 1: 100 (1000)
Button 1 : System Attendant
Button 2: Main Attendants
PGM: 165 - Multicast RTP / RTCP
1 Multicast RTP Flex 1 – 61 8100-8220 Max 4 digit
2 Multicast RTCP Flex 1 – 61 8101 - 8221 Max 4 digit
PGM: 166 - DISA COS
1 Day mode COS 1~11 1
2 Night mode COS 1~11 1
3 Timed mode COS 1~11 1
PGM: 167 - DID/DISA Destination
1 Busy Destination Flex 1~4 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt, F4: Announce
2 Error Destination Flex 1~4 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt, F4: Announce
3 No Answer Destination Flex 1~4 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt, F4: Announce
4 VSF Prompts usage Flex 1~5 Flex 1~5: ON 1: ON, 0: OFF
5 Reroute Busy Destination Flex 1~3 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt
6 Reroute Error Destination Flex 1~3 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt
7 Reroute No Answer Destination Flex 1~3 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt
8 DND Destination Flex 1~3 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt
9
Reroute Net CO busy
Destination
Flex 1~3 Flex 1(Tone)
F1: Tone, F2: Attendant, F3:
Hunt
PGM: 168 - External Control Contacts
1 First Contact 1~3 - 1: LBC, 2: Door, 3: Ext. 1,
2 Second Contact 1~3 - 1: LBC, 2: Door, 3: Ext. 1,
PGM: 169 - LCD Date/Time & Language Mode
1 Date Display Mode
1: MMDDYY
0: DDMMYY
MMDDYY
2 Time Display Mode 1: 12H, 0: 24H 12H