iPECS UCP - Page 115

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
100
Table 3.3.6.1-1 SYSTEM ATTRIBUTES I (PGM 160)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
16
AUTH RETRY COUNT
(1-9) : 3
If a CO’s have “CO/IP group
Authorization” set to ON in
PGM141, 8
th
or the Stations have
“Station Account” set to ON in
PGM112, 19
th
then a valid
authorization code must be entered
to make an external CO call.
When user fails to enter a valid
Authorization code in the number of
attempts assigned in this field, the
station is disconnected or the
Station COS is changed to COS 7.
If the COS 7 WHEN AUTH FAIL,
PGM 161, 17
th
is on then the station
COS is changed to COS 7
otherwise the station is
disconnected. When the station
COS is changed COS 7, the user
must employ COS Restore in
Station User PGM 2 to return the
station to the normal COS.
1 ~ 9 3
17
CONFROOM CO TEL NUMBER
CO TEL:..
ISDN DID number an external party
must dial to enter a Conference
room. UCS Client must pre-
establish the Conf Room.
8 digits
18
MPB DIFFSERV
TAG(00-63): 04
MPB Diff-Serv pre-tag value. 00-63 04
19
UPGRADE MODE
(1:FTP/0:TFTP): FTP
Upgrade transfer mode from MPB
to IP devices.
1: FTP
0: TFTP
FTP
20
TRANSFER TONE
(1:RBT/0:MOH): RBT
When a CO call is transferred to a
busy extension, Ring Back Tone or
Music On Hold will be played to the
CO Line.
0: MOH
1: RBT
RBT
21
CONF WARN TONE
(1:ON/0:OFF) : ON
As new members join a conference
room, the system provides warning
tone to conference members.
0: OFF
1: ON
ON
22
TLS for WEB
(1:ON/0:OFF) : OFF
Enables Transport Layer Security
TLS for Web access.
0: OFF
1: ON
OFF
23
DUMMY DIAL TONE
(1:ON/0:OFF) : OFF
When a CO/IP line does not provide
dial tone, the system can provide
dummy dial tone to the user.
0: OFF
1: ON
OFF
24
SYSTEM 2 ADDED ATTR
PRESS FLEX KEY (01-23)
Select button 24 to access added
attributes 1~23.
FLEX 1 ~
FLEX 23