iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
102
Table 3.3.6.1-1 SYSTEM ATTRIBUTES I (PGM 160)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
24-11
EASY 5 WAKE UP USAGE
(1:ON/0:OFF) : OFF
If this value is set to ON, and PGM
161 – 5-Wake Up Usage is also set
to ON, each station user can enter
his wake up time, without entering
wake up type, wake up index.
0: OFF
1: ON
OFF
24-12
WEB LOGIN ID USAGE
(1:ON/0:OFF) : OFF
If this value is set to ON, Login ID
should be entered to login the web
0: OFF
1: ON
OFF
24-13
VM MEX NOTIFY OVER LCO
(1:EN/0:DIS) : DISABLE
If this value is set to ON, LCO can
be used for the VM notification call
0: DISABLE
1: ENABLE
DISABLE
24-14
MODEM ASC CO LINE
(00-74) : 00
Call is delivered to built-in modem if
calls come in from assigned CO
00-74 0
24-15
MEET ME SOFT DISPLAY
(1:ON/0:OFF) : ON
If this value is set to OFF, {MEET
ME} soft button is not displayed in
0: OFF
1: ON
ON
24-16
DEV INFO REQ INTERVAL
(015-255) : 015
System checks each device by
polling message periodically using
015-255 015
24-17
NUM OF CLI WAIT LIST
(000-255) : 000
The number of CLI wait list can be
the available number.
000-255 000
24-18
EMER MAIL STA
. . .
When an Emergency Mailbox
Station is assigned, an emergency
call placed by a station is recorded
automatically to the assigned
24-19
MSVC XML PORT
(00001-65535) : 07878
The XML port used to support Web
callback, call-through and iPECS
ClickCall application for MSVC
(Mobile Service) must be defined.
00001~65535 7878
24-20
MEXT CO PASSWD
(1:ON/0:OFF) : OFF
When a mobile extension places an
external call using an iPECS CO/IP
Line, the user may be required to
enter a valid Authorization code to
place the call.
OFF
ON
OFF
24-21
DIAL BY NAME LIST
(0:ALL/1:GRP) : OFF
The Dial by Name feature can allow
stations in any ICM tenancy groups
to call a station any in ICM Tenancy
group. When desired, Dial by Name
can be limited to function within
allowed Tenancy calling groups,
All
Accessible
ICM Group
only
ALL