iPECS UCP - Page 173

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
158
Table 3.3.7.2-3 STATION GROUP ATTRIBUTES — RING GROUPS (PGM 191)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
16
FORCED FWD DEST USAGE
(1:ON/0:OFF): OFF
Enables the system to redirect
group calls to the Forced destination
defined under button 15 above.
0: OFF
1: ON
OFF
17
WAIT IF 1ST ANNC BUSY
(1:ON/0:OFF): ON
When a call assigned to receive an
announcement arrives and all
channels are busy, the call may wait
with Ring back until a channel is
available (ON) or bypass the
announcement.
0: OFF
1: ON
ON
18
GROUP NAME
……………………………….
A Ring group name can be
designated.
20 character ….
19
RING Q CALL INDI
0(OFF)1(MUTE)2(BURST):1
When a station calls a Ring Group,
DSS/BLF buttons assigned for the
calling station will flash and muted
ring is received.
0:OFF
1: Mute
2: Burst
Mute
Table 3.3.7.2-4 STATION GROUP ATTRIBUTES — EXTERNAL VM GROUPS (PGM 191)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
VM 407 WRAP-UP TMR
(000 – 999) : 002
After terminating any call, the VM
port will be maintained in a busy
state for the duration of the WRAP-
UP Timer.
000~999
(seconds)
002
2
VM 407 PUT MAIL INDEX
(1 – 4) : 1
For external analog Voice Mail
groups, an index to the Voice Mail
Dial Table, this contains the “Put
Mail” dial code.
1~4 1
3
VM 407 GET MAIL INDEX
(1 – 4) : 2
For external analog Voice Mail
groups, an index to the Voice Mail
Dial Table, which contains the “Get
Mail” dial code?
1~4 2
4
VM 407 HUNT TYPE
(1 : CIR/ 0 : TERM): TERM
The type of Hunt process applied to
the SLT ports connected to the VM
can be assigned as Circular or
Terminal.
0: TERM
1: CIRC
TERM
5
VM 407 OVERFLOW TMR
(000 - 600) : 180
A call to a group will remain queued
to the group or be sent to the
assigned OVERFLOW DEST after
expiration of the OVERFLOW TMR.
000~600
(seconds)
180
6
VM 407 OVERFLOW DEST
S/H/V/SPD (Dial 1-4)
A call to the group will continue to
route through the group until
answered or all group members
have been tried. The call will remain
at the last station or routes to the
assigned OVERFLOW DEST.
1-4
(1:Station
2:Station group
3:VSF Announce
4:System speed)
-