iPECS UCP - 2.8 Auto Called Number Redial (ACNR)

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
39
Table 3.3.3.2-1 STATION ATTRIBUTES I (PGM 111)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
16
100-110 ACT PTT GRP
ACTIVE PTT GROUP: .
A station can be assigned to a PTT
group and the group enabled so the
station can place and receive PTT
announcements for the group.
0~9 .
17
100-110 ICM GROUP
(01-15): 01
Assigns station to an ICM Tenancy
Group, refer to PGM 125.
eMG80:1~15
eMG800:0~32
1
18
100-100 VMIU/VMIB BOARD
USE 1ST VMIU/VMIB
Assigns the VMIU or VMIB where
messages for the station are stored.
Sequence no
19
100-110 SIP UID TBL
(000-140) : 000
Index to SIP User ID table, PGM 126,
for the station. Note PGM 126 is
accessible by Web only.
000-140 000
20
100-110 CAMP ON TONE
(1:ON/0:OFF) : ON
Permits camp on tone to be sent to a
station when the station receives
camp-on request.
0: OFF
1: ON
ON
21
100-110 SERIAL DSS
(1:EN/0:DIS):ENABLE
Assigns Serial DSS usage authority. 0: Disable
1: Enable
Enable
22
100-110 DLTN (00-10)
DIAL TONE (00)
Each station can choose one of eleven
dial tone sources
00: dial tone
01: INT music
02: EXT music
03: VSF MOH
04: SLT MOH1
05: SLT MOH2
06: SLT MOH3
07: SLT MOH4
08: SLT MOH5
09: VSF MOH2
10:VSF MOH3
dial tone
23
100-110 RBTN (00-10)
RING BACK TONE (00)
Each station can choose one of eleven
ring back tone sources
00: ring back
tone
01: INT music
02: EXT music
03: VSF MOH
04: SLT MOH1
05: SLT MOH2
06: SLT MOH3
07: SLT MOH4
08: SLT MOH5
09: VSF MOH2
10:VSF MOH3
ring back
tone
24
100-110 ATTACH MSG
(1:ON/0:OFF) : ON
When e-mail notification of a new VSF
message is enabled, (PGM 236-button
7) the e-mail may include the voice
mail as a wav file attachment. VSF
mail server IP (PGM 113-button18) &
VSF Mail Address (PGM 113-
button19) are required for proper
operation.
0: OFF
1: ON
ON