iPECS UCP - Page 55

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
40
Table 3.3.3.2-2 STATION ATTRIBUTES II (PGM 112)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
100-110 CALL TIME TN
(1:ON/0:OFF) : OFF
A tone can be sent periodically
indicating the elapsed time of an
outgoing CO/IP call. The Elapsed Call
Timer (PGM 180-button 19)
determines the period between tones.
0: OFF
1: ON
OFF
2
100-110 AUTO HOLD
(1:ON/0:OFF) : OFF
Enables Auto Hold for the station. With
Auto Hold enabled, the system will
place an active external call on hold if
the user presses a CO/IP or DSS
button.
0:
OFF(Others)
1: ON(ATD)
OFF
3
100-110 TIME RESTRICT
(1:ON/0:OFF) : OFF
The system can automatically
disconnect outgoing calls at expiration
of the Call Restrict timer (PGM 180-
button 14).
0: OFF
1: ON
OFF
4
100-110 IND CO ACCESS
(1:EN/0:DIS) : ENABLE
Permits stations to use dial codes to
access individual CO Lines.
0: Disable
1: Enable
Enable
5
100-110 CO/IP QUEUING
(1:EN/0:DIS): ENABLE
Permits the station to queue for the
next available Line when an All Lines
Busy signal is received.
0: Disable
1: Enable
Enable
6
100-110 CO PGM
(1:EN/0:DIS): DISABLE
A station can be permitted to change
the CO Line numbers (ports)
associated with a CO Line button.
0: Disable
1: Enable
Disable
7
100-110 RING LINE PRE
(1:EN/0:DIS) : ENABLE
Enables Ringing Line Preference for
the station. Calls that ring the
telephone are answered by going off-
hook.
0: Disable
1: Enable
Enable
8
100-110 SPD ACCESS
(1:EN/0:DIS) : ENABLE
Allows the station access to System
Speed Dial bins.
0: Disable
1: Enable
Enable
9
100-110 UCD GRP SVC
(1:ON/0:OFF) : OFF
When unavailable, DID/DISA calls to
the station can be routed to the ACD
Group to which the station is a
member.
0: OFF
1: ON
OFF
10
100-110 RING GRP SVC
(1:ON/0:OFF) : OFF
When unavailable, DID/DISA calls to
the station can be routed to the Ring
Group to which the station is a
member.
0: OFF
1: ON
OFF
11
100-110 TWO WAY RECD
(1:ON/0:OFF) : OFF
When allowed, the station can activate
the Two-way record feature to record a
conversation.
0: OFF
1: ON
OFF
12
100-110 MSG SCRL SPD
(0 - 7) : 3
Select message scroll speed for IP
phone (Not presently used).
0 ~ 7 3
13
100-110 HOT DESK STA
(1:ON/0:OFF) : OFF
A station can be assigned as a Hot
Desk phone. Users and agents can
login and use resources of the system
through the Hot Desk phone.
0: OFF
1: ON
OFF