iPECS UCP - Page 56

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
41
Table 3.3.3.2-2 STATION ATTRIBUTES II (PGM 112)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
14
100-110 PREFER CO/GRP
…..
The system will seize this CO Line or
CO group number when the station
dials ‘9’ (First available CO access
code).
CO # or
CO Group #
..
15
100-110 SEND SLT CLI
(1:ON/0:OFF) : ON
When allowed, system will send CLI
information to the SLT.
0: OFF
1: ON
ON
16
100-110 UCD PRIORITY
(0-9) : 0
ACD Group members may be
assigned a priority, 0-9. Members with
the highest priority are sent calls
ahead of lower priority members. This
field is the same as PGM 191-button
19 for ACD Groups.
0 ~ 9 0
17
100-110 EZ PWD LOGIN
(1:ON/0:OFF
For ez ATD. Enables/disables required
Auth code use.
0: OFF
1: ON
OFF
18
100-110 EMERGENCY CO
…..
This field defines the CO Line or Group
employed by the system to place
Emergency Assistance calls.
CO #,
CO Group #,
Transit-out
Any CO
19
100-110 STA ACCOUNT
(1:ON/O:OFF) : OFF
When ON, the station user must enter
an authorization code to access CO
Lines.
0: OFF
1: ON
OFF
20
100-110 AUTO CALL REC
(0:OFF/1:ALL/2:CO): OFF
This field enables unconditional
recording of all calls placed/received
by the station.
Recordings, in .wav format, are stored
at the UCS Client or Recording Server
(IPCR or 3rd party) defined under
button 21. Station and CO calls are
recorded with ALL. Only CO calls are
recorded with CO.
0: OFF
1: ALL
2: CO
OFF
21
100-110 CALL REC DEST
……..
When Unconditional Call recording is
enabled as above, the recording UCS
Client station number is defined here.
station
22
100-110 VSF BK DEL
(1:ON/0:OFF) : OFF
UCS Client may monitor voice
messages for another station as a
backup.
The UCS Client will include the
message count for the station in the
Voice message count. When enabled
here, the UCS Client may delete
messages for the station.
0: OFF
1: ON
OFF