iPECS UCP - Page 64

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
49
Table 3.3.3.3-1 STATION ISDN ATTRIBUTES (PGM 114)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
12
100-110 MSN WAIT
(1:ON/0:OFF ) : OFF
When a call that is corresponding to a
MSN Telephone Number comes in to
system, the call is basically routed to idle
stations that have free MSN button that is
assigned for the corresponding
Telephone Number. And also the call can
be routed to busy stations in the following
condition.
OFF : if a keyset is in a busy status,
cannot receive incoming MSN Telephone
Number corresponding call even though
it has a free(idle) corresponding MSN
LOOP Button
ON : if a keyset is in a busy status, can
receive incoming MSN Telephone
Number corresponding call if it has a
free(idle) corresponding MSN LOOP
Button
0: OFF
1: ON
OFF
13
14
100-110 DID RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DID call. 0: OFF
1: ON
OFF
15
100-110 DISA RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DISA call. 0: OFF
1: ON
OFF
16
17
100-110 MODEM ENABLE
(1:ON/0:OFF ) : OFF
It is used to set modem attributes. 0: OFF
1: ON
OFF
18
100-110 FAST XFER CLI
(1:ORI/0:TRN ) : TRN
If a user transfers a CO call with CLI to
SLT or DECT, CO CLI can be seen
instead of station number when this
option is set to ORI.
0: TRN
1: ORI
TRN
19
20
100-110 PICKUP BY BTN
(1:ON/0:OFF ) : ON
It is used to set pick up by flex button. 0: OFF
1: ON
ON
21
100-110 MULTI LANG
(1-6):PROMPT1 A.AMERICA
Selected language prompt is played to
the user when accessing the VMIU or
VMIB.
1~6
(1:
N.AMERICA
2:KOREA
3:TURKIYE
4:RUSSIA
5:AUTRALIA
6:GERMANY)
1