3.8 Useful Functions for Screen Editing
3-98
Paste to the Selected Screen
Items selected on one screen can be pasted to multiple screens at the same time.
Follow the steps described below.
1. Click items on the screen or drag the mouse to select multiple parts.
2. Click [Paste to Selected Screen] from the [Edit] menu.
The following dialog is displayed.
3. Click [OK]. Paste operation is performed.
Paste Target Select (Start / End) Specify the screen numbers to which you wish to
paste the selected item.
Do Not Paste to the Unregistered Screens When the selected item should not be pasted on
unregistered screens, check this box. To paste
the selected item on unregistered screens,
remove the check mark.
If paste operation is performed on a layer (such as an overlap) where the number of items per screen
is limited and the number reaches the limit, the error message “No more Overlap can be registered.” is
displayed.
To cancel [Paste to Selected Screen] that you performed, click [Undo Paste to Selected Screen] in the [Edit] menu.
To Next Page
Loading...