Windows Font
A1-38
Windows Fonts for Language Selection
A CF card is not necessary when Windows fonts are used for language selection. Some limitations,
however, apply to the above.
Conditions for Language Selection Using Windows Fonts
• Font setting
For the interface languages, select the same font (the [Font Setting] dialog).
If different fonts are selected, a CF card must be used.
• Screen data capacity
Windows fonts will occupy a large memory space in screen data. Check available memory
constantly.
In comparison to the amount of memory consumed for screen data without Windows fonts, the
amount may be doubled if Windows fonts are used.
• Text properties
Except for the font type selection, the same text properties apply to the languages.
For all the languages, [Windows Font] must be checked, and the other properties including the
point size must be the same. Therefore, checking [Windows Font] for only one of the languages
(the second language, for example) is not allowed.
Multi-Language Editing Using Windows Fonts
• Multi-language editing is performed basically on the screen in the editor software or in the
[Multi-language [n] Edit] window (click [Registration Item] → [Multi-language]).
• If any language is incorrectly displayed in the [Multi-language [n] Edit] window, click [Tool] →
[Multi-language Setting] and select the correct font in the [Multi-language Edit Setting] dialog.
If text converted to a CSV file ([System Setting] → [Font Setting] → [Export]) is read into another editor software,
whether or not this operation is supported depends on which language is used.
Whenever you wish to use [Export], consult with your local distributor.
To Next Page
Loading...