Hakko Electronics V8 series - Elliptical Arc and Elliptical Sector

4.3 Drawing Methods
4-26
5. Click the “ ” mark on the right of the [Ellipse] icon.
The pull-down menu is displayed.
Selects [Ellipse (Center)].
6. Drag the mouse from the center to the desired radius. The ellipse is drawn.
7. To reset the drawing setting, right-click or double-click the mouse.
By dragging the mouse again without resetting it, you can draw another ellipse continuously.
Elliptical Arc and Elliptical Sector
Drawing method: [Elliptical Arc (Center)]
1. Click the “ ” mark on the right of the [Frame Type] icon on the toolbar.
Select the desired frame type from the list displayed. ([With Frame (Paint)] is selected as an
example.)
2. Likewise, select a frame color from the [Line Color/Frame Color] icon and a color of the frame
inside from the [Paint Color] icon.
Ellipse (Center):
Drag from the start point to the end
point of the box where an inscribed
ellipse is drawn.
: Start point
: End point
Ellipse (Edge):
Drag from the center for the
major radius.