Parts Editing
A3-11
A3
Parts Editing
Keypad
Structure
A keypad part for numerical or text entry consists of multiple switch parts.
Procedure
The editing procedure is the same as that for switch parts.*
For more information, refer to “Switch / Lamp” (page A3-5).
* The switch parts are linked. Therefore, the switch parts need to be unlinked prior to editing.
In the right-click menu, click [Link] → [Link Cancel]. Or, click [Edit] → [Link] → [Link
Cancel].
Once the switch parts are unlinked, linking them again is recommended after editing is
finished.
Slider Switch/Scroll Bar
Structure
A slider switch part or a scroll bar part consists of a sliding switch and a rail. The slide switch and the
rail must be edited independently.
Similar to a switch part, each of slider switch and scroll bar parts has a touch area.
Procedure
1. Select the slider switch part you wish to edit and open the [Modify Part] window. The [Modify Part]
dialog is displayed.
2. The sliding switch and the rail must be edited independently. Select [Edit a rail] or [Edit a slider]
and click [OK].
The editing procedure is the same as that for switch parts.
For more information, refer to “Switch / Lamp” (page A3-5).
.
2
5
8
9
7
4
6
1
3
0
CL
CR
UP
DW
+/-
A
G
M
S
UP
B
H
N
T
C
I
O
U
D
J
P
V
E
K
Q
W
F
L
R
X
DW SP DL CL CR
A keypad part consists
of multiple switch
parts.
Frame (part area)Graphic data
Part basic area (= touch area*)
Frame (part area)
• Rail • Sliding switch
To Next Page
Loading...