Hakko Electronics V8 series - Data Comparison between Editor and MONITOUCH

6.4 Transfer Procedure (Using a Communication Cable)
6-16
Data Comparison between Editor and MONITOUCH
Screen data can be compared between MONITOUCH and the computer.
Data comparison is useful to check if there are any differences between the data transferred from
MONITOUCH and the original present in MONITOUCH.
1. Connect MONITOUCH (MJ1) and the computer using V-CP.
If [No Connection] is not set for the MJ1, display the Main Menu screen on MONITOUCH.
2. Start up the editor and open the screen data file to be compared.
(The native data file transferred from MONITOUCH is acceptable.)
3. Click [Transfer] from the [File] menu or click the [Transfer] icon on the toolbar.
4. The [Transfer] dialog is displayed.
Select [Display] for [Transfer Device], and [Screen Data] for [Transfer Data].
5. Click the [Communication Setting] button.
The [Communication Setting] dialog is displayed.
OR