2.5 Toolbar
2-25
2
Editor
Edit
1. Cut Cuts selected item.
2. Copy Copies selected item.
3. Paste Pastes copied or cut item.
4. Multi Copy Copies selected item multiple times.
5. Bring to Top Brings selected item on the top.
6. Send to Bottom Sends selected item to the bottom.
7. Group Groups multiple items selected.
8. Ungroup Ungroups selected items.
9. Rotate 90 degrees CCW Rotates selected item 90 degrees counterclockwise.
10. Rotate 90 degrees CW Rotates selected item 90 degrees clockwise.
11. Horizontal Flip Flips selected item horizontally.
12. Vertical Flip Flips selected item vertically.
13. Modify Part Opens window where selected part is modified.
14. Undo Cancels action performed last (enabled up to 16 times).
15. Redo Reverts state before undoing (enabled up to 16 times).
16. Point Search Depressed: Point search becomes enabled.
Raised: Point search is disabled.
* For more information on point search, refer to page 3-4.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
To Next Page
Loading...