8.1 Simulator
8-5
8
Useful Functions
Via Ethernet
Connect the V8 series to a computer using a LAN cable.
Be sure to connect the cable to the LAN port of the V8 series. (This applies only to the model V8i. For
models other than V8i, a communication I/F unit is additionally required.)
Via USB
Connect the V8 series to a computer using a USB cable.
Be sure to connect the cable to the USB-B port of the V8 series.
Ethernet
PLC
F 1
F 2
F 3
F 4
F 5
F 6
F 7
SYSTEM
Computer
V8 series
(Ethernet-capable)
F 1
F 2
F 3
F 4
F 5
F 6
F 7
SYSTEM
USB-A USB-B
V8 series
Computer
USB cable
To Next Page
Loading...